1500 S. IH-35E Service Road

Ste# 101, Lancaster
Texas 75146

(469)336-2757

Call us

Sale!

SikaTile 200 Fracture Guard Rapid Crack Isolation Membrane

$88.99

Stock#: 648464 | UPC#: (none)

Sold by the Bucket | Online Sale Only

  • For use on all sound common surfaces
  • Crack isolation up to 1/8-in
  • Excellent elongation will inhibit the transfer of cracks
Get a shipping quote
SKU: 648456 Category: Tags: , ,

SikaTile Tile 200 Fracture Guard Rapid

Looking for a crack-isolation membrane for your ceramic tile or stone installation? Look no further than Sika® Tile 200 Fracture Guard Rapid. This fast-drying, single-component liquid membrane is perfect for residential, commercial, and industrial use. With its exceptional adhesion, elongation, and high strength properties, SikaTile®-200 Fracture Guard Rapid creates a thin, continuous barrier that offers up to 1/8” (3 mm) of in-plane crack isolation. This product dries quickly, typically within 1 to 2 hours depending on ambient conditions. It is ready for any Sika polymer or epoxy mortar—Trust Sika® Tile 200 Fracture Guard Rapid for a durable and long-lasting tile or stone installation.

Usage

SikaTile®-200 Fracture Guard Rapid may be installed over any sound substrate normally acceptable to receive ceramic, quarry, porcelain, and stone tiles. When installed in accordance with the manufacturer’s specifications, SikaTile®-200 Fracture Guard Rapid will inhibit transferring of shrinkage and non-structural cracks caused by horizontal movement, when tile and stone finishes are used. Ideal for both residential and commercial applications.   RECOMMENDED SUBSTRATES SikaTile®-200 Fracture Guard Rapid can be installed in most interior and exterior residential and commercial installations on floors over the following recommended substrates:

  • Brick Masonry
  • Cement Backer Board1
  • Cement Mortar Beds (cured)
  • Cement Terrazzo
  • Ceramic Tile and Stone
  • Concrete
  • Exterior Grade Plywood2
  • Gypsum Drywall2
  • Gypsum Mortar Bed
  • Gypsum Oriented Strand Board2
  • SikaLevel® Products
  1. Consult cement backer board manufacturer for installation recommendations and to verify acceptability for exterior use
  2.  Interior Use Only

Advantages

  • For use on all sound common surfaces
  • Crack isolation up to 1/8”
  • Excellent elongation will inhibit the transfer of cracks
  • Antimicrobial for mold and mildew resistance at the substrate
  • Rapid drying – Begin tile and stone installation in 1 – 2 hours
  • Easy installation with brush, roller, or trowel
  • Excellent adhesion – bonds to most flooring surfaces
  • Does not increase surface elevation
  • Interior or exterior
  • Low VOC’s

 

Product Details

Sustainability | Certifications | Approvals

ENVIRONMENTAL INFORMATION

Sika® is committed to environmental responsibility in both products produced and in manufacturing practices. Use of this product can contribute towards LEED® v4.1 certification:

  • Up to 2 points towards MR Credit 5, Regional Materials

APPROVALS / STANDARDS

American National Standards Institute (ANSI) — ANSI A108.01, A108.17, and A118.12 of the American National Standards for the Installation of Ceramic Tile ASTM International (ASTM)

  • Resilient Floor Covering Institute – (RFCI) Recommended Work Practices for Removal of Resilient Floor Coverings
  • Tile Council of North America (TCNA) – TCNA Handbook for Ceramic Tile Installation, TCNA F125, F125A, and EJ171 Movement Joint Guidelines.
  • ASTM D638 Standard Test Method for Tensile Properties of Plastics.
  • ANSI: Meets A118.12 standard (Crack-Isolation Membranes for Thin-Set Ceramic Tile)

Product Information

Chemical Base

Emulsion polymer with additives

Shelf Life

15 months from the date of production when stored in the original, sealed package

Storage Conditions

Store in an undamaged, original, sealed package, in dry conditions

Technical Information

Tensile Adhesion Strength

> 350 psi (2.41 MPa) – ASTM D412

Slant Shear Strength

Property Test Method Results
Seam Strength ASNI A18.10 Section 4.2 Pass
Breaking Strength ASNI A18.10 Section 4.3 Pass
Dimensional Stability ASNI A18.10 Section 4.4 Pass

Application

Layer Thickness

30 – 35 mils

Final film thickness ≥ 15 Mils

Cure Time

1 – 2 hours

*When cured at 70 º F (21 º C) and 50% RH.  Ambient conditions may speed or slow drying times.

 

Consumption

Coverage

80 sq. ft. per gallon at 30-35 mils thick

 

Application Steps

MIXING

Ready to use – stir by hand prior to use

APPLICATION

Read all installation instructions before installation. Ready to use the product, do not dilute and stir by hand prior to use. Fill all cracks with SikaTile®-200 Fracture Guard Rapid using a flat trowel. Apply SikaTile®-200 Fracture Guard Rapid to the surface with a trowel, brush, or roller. Normal coverage is approximately 80 sq. ft. per gallon at 30-35 mils thick. After SikaTile®-200 Fracture Guard Rapid has dried (approximately 1 hour depending on surface porosity and ambient conditions; cool and wet weather may delay drying time), tile or stone may be installed directly over the membrane using a polymer-modified tile setting adhesive.

 

Finish Surface Installation
Apply finish flooring in compliance with methods of installation over crack-isolation membranes. Do not install any defective, damaged, or finish flooring surface, not for its intended use. The installation of this product does not eliminate the need for movement joints, including perimeter joints with a tiled surface.  Provide for expansion and control joints as specified per TCNA Method EJ171. Do not cover expansion joints with mortar.

 

SikaTile® elastomeric membranes, when properly installed in accordance with the following installation guidelines, will provide years of protection for finish flooring installations. In addition to these instructions, installers shall also reference the most current edition of the American National Standards Institute (ANSI), Tile Council of North America (TCNA) Handbook for Ceramic Tile Installations, The Marble Institute of America (MIA) Dimension Stone Design Manual, NWFA (National Wood Flooring Association) and Manufacturer’s instructions of selected setting materials, substrates, sub-floors, or other manufacturers being used in total, or any part of, an installed flooring system with SikaTile®. Consult your selected manufacturer of these above-mentioned components to ensure selected products are compatible with SikaTile® elastomeric membranes.

CLEANING OF TOOLS

Clean tools and tiles with water before the material dries.

Packaging:

Sold As: Bucket (3.50 Gallons)
Weight Per Bag: 45 Pounds
Shipped Via: UPS Ground / LTL Delivery

 

Additional information

Weight 40 lbs
Dimensions 12 × 12 × 12 in
Brand

Sika

Installation Method

Apply with Paint Brush, Apply with Trowel

Product Type

Moisture Barrier, Moisture Guard

Project

Bathroom Backsplash Prep, Kitchen Backsplash Wall Prep, Shower Wall Prep, Substrate Prep

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Free In-Store Pickup

Nationwide Shipping Available

Design Help

Servicing our customers since 2013

700+ Google Reviews

Floor & Cabinet Expert! We can answer your questions