1502 I35E Suite #270 Lancaster, TX 75146

(469) 336-2757

Sale!

SikaTile 100 Moisture Guard Waterproofing Crack Isolation Membrane

$150.00

Stock#: 648463 | UPC#: 338861363720

Sold by the Bucket

  • For us in areas that require positive waterproofing
  • Crack Isolation up to 1/8-In
  • Fast-drying, foot traffic in 2 – 4 hours

 

SKU: 648453 Category: Tags: , ,

SikaTile® 100 Moisture Guard

Sika Moisture Guard is FAST-DRYING ELASTOMERIC WATERPROOFING AND CRACK ISOLATION MEMBRANE

Ensure the longevity and durability of your tile or stone installations with SikaTile® 100 Moisture Guard - the fast-drying, elastomeric waterproofing, and crack isolation membrane that provides unbeatable protection against water damage. As a single-component, load-bearing membrane, Sika Moisture Guard offers excellent elongation, adhesion, and high strength properties, creating a thin, continuous barrier that protects adjacent rooms and floors below. Whether in residential, commercial, or industrial environments, SikaTile® 100 Moisture Guard offers outstanding performance, combined with optional reinforcing fabric to provide additional protection for areas of change of plane. With a drying time of just 2 to 4 hours, SikaTile® 100 Moisture Guard is IAPMO-listed for use as a shower pan liner, and exceeds ANSI A118.10 and ANSI A118.12 standards. Don't let water damage your tile or stone installations - choose SikaTile® 100 Moisture Guard today for unbeatable protection.

 

Usage

SikaTile® 100 Moisture Guard may be installed over any sound substrate normally acceptable to receive ceramic, quarry, porcelain, and stone tiles as a fast-drying, 100% waterproof membrane for shower pans and other load-bearing waterproofing applications.
When installed in accordance with the manufacturer’s specifications, SikaTile® 100 Moisture Guard will inhibit transferring of shrinkage and non-structural cracks caused by horizontal movement, when tile and stone finishes are used.
Covers and protects almost any architectural design form or irregular shape and is ideal for interior and exterior use in both residential and commercial applications.
RECOMMENDED SUBSTRATES SikaTile® 100 Moisture Guard can be installed in most interior and exterior residential and commercial installations on floors over the following recommended substrates:

  • Brick Masonry
  • Cement Backer Board (Reference Field 1 below)
  • Cement Mortar Beds (cured)
  • Cement Terrazzo
  • Ceramic Tile and Stone
  • Concrete
  • Exterior Grade Plywood (Reference Field 2 below)
  • Gypsum Drywall (Reference Field 2 below)
  • Gypsum Mortar Bed
  • Gypsum Oriented Strand Board (Reference Field 2 below)
  • SikaLevel® Products
  1. Consult cement backer board manufacturer for installation recommendations and to verify acceptability for exterior use.
  2. Interior Use Only.

Advantages

  • For use in areas that require positive waterproofing
  • Crack Isolation up to 1/8”
  • Fast-drying, foot traffic in 2 – 4 hours
  • Flood test after 4 – 6 hour cure
  • Excellent elongation will inhibit the transfer of cracks
  • Antimicrobial for mold and mildew resistance at the substrate
  • Easy installation with brush, roller, or trowel
  • Excellent adhesion – bonds to most flooring surfaces
  • Does not increase surface elevation
  • Interior or exterior
  • Low VOC’s

Sustainability | Certifications | Approvals

ENVIRONMENTAL INFORMATION

Sika® is committed to environmental responsibility in products produced and manufacturing practices. Use of this product can contribute towards LEED® v4.1 certification:

  • Up to 2 points towards MR Credit 5, Regional Materials

APPROVALS / STANDARDS

American National Standards Institute (ANSI) — ANSI A108.01, A108.17, A118.10, and A118.12 of the American National Standards for the Installation of Ceramic Tile ASTM International (ASTM)

  • Resilient Floor Covering Institute - (RFCI) Recommended Work Practices for Removal of Resilient Floor Coverings
  • ASTM D638 Standard Test Method for Tensile Properties of Plastics.
  • ANSI: Meets A118.10 standard (Waterproofing Membranes for Thin-Set Ceramic Tile)
  • ANSI: Meets A118.12 standard (Crack-Isolation Membranes for Thin-Set Ceramic Tile)
  • IAPMO: Listed for use as a shower-pan liner; IAPMO File #K12899
  • ICC Evaluation Report ESR-2619 -PMG
  • The city of Los Angeles, Department of Building and Safety, Research Report #RR-4321
  • Tile Council of North America (TCNA) - TCNA Handbook for Ceramic Tile Installation, TCNA F125, F125A, and EJ171 Movement Joint Guidelines.

Product Information

Chemical Base

Emulsion polymer with additives

Shelf Life

15 months from the date of production when stored in an original, sealed package

Storage Conditions

Store in undamaged, original, sealed package, in dry conditions

System Information

Property Test Method Requirement Typical Results
Adhesion - - 250 psi
Elongation ASTM D412 - 300 - 400%
Seam Strength ANSI A18.10 Section 4.2 > 8 lbs./" width Pass
Breaking Strength ANSI A18.10 Section 4.3 > 170 psi Pass
Dimensional Stability ANSI A18.10 Section 4.4 +/- 0.7% Pass

Technical Information

Tensile Strength

> 350 psi (2.41 MPa) - ASTM D412

Crack Bridging Ability

Up to 1/8"

Application

Application Information

Cure Time

SikaTile®-100 Moisture Guard is dry when it turns light blue, with no visible dark color as applied. Typically, drying time is 2 to 4 hours; depending on ambient conditions.  Extreme cold and humid conditions will extend drying time up to as much as 12 hours. After the second coat is applied and both coats are fully cured, the application area can be flood tested.

Drying Time

2 - 4 hours*

*When cured at 70 º F (21 º C) and 50% RH.  Ambient conditions may speed or slow drying times.

Consumption

Coverage

50 sq. ft. per gallon at 30 mils thick

Application Steps

SUBSTRATE PREPARATION

All surfaces must be between 40º F (4º C) to 90º F (32º C) and structurally sound (deflection not to exceed 1⁄360 of the span), dry, clean, and free from oil, grease, wax, paint, old adhesives, sealers, and curing compounds.
Any contaminates which inhibit proper bonds must be removed.
Substrate preparation should be completed following ANSI A108 AN-2 “General Requirements for Sub-surfaces”.
All substrates should be plumb and true, surface deviation should not exceed 1⁄4" in 10’.
Patching, leveling, or areas requiring a mortar bed should be prepared using SikaLevel® Underlayments. Movement (Expansion) joints should be provided to comply with TCNA method EJ171.
Concrete must be free of any negative hydrostatic pressure and/or excessive moisture.

 

SUBSTRATES

Concrete Substrates:
All concrete substrates should be cured for a minimum of 28 days.
Smooth steel troweled floors should be roughed up using mechanical chipping, scraping, or shot blasting.
Dampen porous or dry concrete prior to installation of tile. Do not leave puddles or standing water.
Rough or uneven surfaces should be made smooth with a Latex Portland cement underlayment to provide a wood float or better finish.
Do not level with asphalt-based products.
Concrete should be tested for both moisture vapor transmission and hydrostatic pressure, by use of a Calcium-Chloride (CaCl) test.
Consult technical support if test readings indicate a reading greater than 5 lbs. per 1,000 sq. ft. in 24 hours.
Existing joint openings larger than 3/16” must be prepared and filed with approved caulking or sealant prior to the application of primer and elastomeric membrane.

 

Patching, Self-Leveling Compounds, and Lightweight Gypsum Concrete: Should be cured to the minimum manufacturer’s requirement for moisture-sensitive installations.

Plywood and OSB Substrates:
Must be a minimum of two (2) layers of 5/8” exterior grade plywood (EGP). Plywood shall be securely fastened in accordance with industry standards.
Maintain a 1/8” gap between plywood sheets and all surfaces they abut.
Joints in the top layer should be offset from the joints on the bottom layer.
Maximum joist spacing should be 16” on center and the deflection of the floor structure and sub-floor must not exceed L/360 of the span under combined live or dead loads.

 

Other Substrates:
All other substrates and or sub-flooring systems shall be installed in a manner approved by both the product manufacturer and using appropriate installation methods.

CLEANING OF TOOLS

Clean tools and tiles with water before the material dries.

Packaging:

Sold As: Bucket (3.50 Gallons)
Weight Per Bag: 45 Pounds
Shipped Via: UPS Ground / LTL Delivery

 

Additional information

Weight 40 lbs
Dimensions 12 × 12 × 12 in
Brand

Sika

Installation Method

Apply with Paint Brush, Apply with Trowel

Product Type

Moisture Barrier, Moisture Guard

Project

Bathroom Backsplash Prep, Kitchen Backsplash Wall Prep, Shower Wall Prep, Substrate Prep

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Free In-Store Pickup

Nationwide Shipping Available

Design Help

Servicing our customers since 2013

700+ Google Reviews

Floor & Cabinet Expert! We can answer your questions